SIMPSON STRONG TIE ET-HP22-N Epoxy Nozzle Tie Cartridge Extension

ET-HP is a two-component, high-solids, epoxy-based system for use as a high-strength, non-shrink anchor-grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. ET-HP is formulated for anchoring threaded rod and rebar into concrete (cracked/uncracked) and masonry. Size: 22 Oz Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to elevated temperatures and long-term sustained loads Code listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-3372 Code listed under the IBC/IRC for masonry per IAPMO UES ER-241 Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry Cure times: 24 hours at 70°F, 72 hours at 50°F Easy hole-cleaning – no power-brushing required Suitable for use in dry or water-saturated concrete When properly mixed, adhesive will be a uniform gray color. WARNING: This product contains chemicals like Bisphenol-A and Epichlorohydrin which are listed by the State of California as known to cause Reproductive harm. www.P65Warnings.ca.gov

• Mixed properly will be a uniform medium gray Color
• Can be reused by simply adding a new nozzle
• Fully cures in 24 hours when used in base material from 60 to 80 degrees